Pro Pro is active in this browser. Open your Pro accountPro free trial is active. Open your Pro accountPro is active but will not renew. Open your Pro account

Online Guitar Tuner

A guitar tuner app that needs no install: press Start, allow the microphone and pluck a string. The tuner finds which string it is, shows how many cents sharp or flat, and ticks it off when it holds in tune.

Free · runs in your browser · nothing is uploaded

Open on Tonelume

This embed was switched off for this website. Open on Tonelume

Add this tool to your siteFree embed code, no sign-up. Keep the credit link.

Embed this tool

Copy this code into your website, blog or class page. The tool runs inside your page.

Optional settings, added to the address after embed=1: &accent=0f6b5c (colour, 3 or 6 hex digits). Other parameters are ignored.

Please keep the credit link below the tool.

This free guitar tuner listens through your microphone and tells you which string you played and how far it is from the right pitch. You do not pick a string first: pluck any string and the tuner finds the closest one of the tuning, shows the note, and moves the needle. The needle sits in the green zone when the string is within 5 cents, which is too small to hear. Hold it there for about half a second and the string gets a check mark.

It runs in your browser with no sign-up. The microphone sound is analysed on your device and is never recorded or uploaded. Works for acoustic, electric and classical guitar; for an electric guitar without a microphone near the amp, play near your computer or phone and let the string ring.

How to tune a guitar

  1. Start the tuner. Press Start tuner and allow the microphone when the browser asks. In a quiet room hold the guitar a few inches from the device.
  2. Pluck one string at a time and let it ring. Begin with the low E (6th, thickest) string.
  3. Read the needle. Left of the middle means the string is flat, so tighten the tuning peg slowly; right means sharp, so loosen it. When the note shows green and “In tune”, the string gets a check mark.
  4. Go through all six strings, then play the first one again, because tightening one string changes the neck tension a little.
  5. No sound to compare with? Press a string button (E, A, D, G, B, E) to hear its reference note and match it by ear.
  6. Other pitch? Change A4 in the Calibrate box if your band or recording uses something other than 440 Hz, for example 432 or 442. Strings and reference tones follow.
  7. Use the string checklist. The six letters under the needle fill in as each string holds in tune for a moment, so you can see at a glance which string is still left. If the needle jumps between two notes, pluck more gently and let the string ring for a second before you turn the peg.

Guitar tuning chart with frequencies

Strings are listed from the lowest, thickest string to the highest. The frequencies are for A4 = 440 Hz and come from the same table the tuner uses.

TuningStrings (low to high)Hz at A4 = 440
Standard (EADGBE)E2 A2 D3 G3 B3 E482.4 110.0 146.8 196.0 246.9 329.6
Drop D (DADGBE)D2 A2 D3 G3 B3 E473.4 110.0 146.8 196.0 246.9 329.6
DADGADD2 A2 D3 G3 A3 D473.4 110.0 146.8 196.0 220.0 293.7
Open G (DGDGBD)D2 G2 D3 G3 B3 D473.4 98.0 146.8 196.0 246.9 293.7
Open D (DADF#AD)D2 A2 D3 F#3 A3 D473.4 110.0 146.8 185.0 220.0 293.7
Open E (EBEG#BE)E2 B2 E3 G#3 B3 E482.4 123.5 164.8 207.7 246.9 329.6
Open A (EAC#EAE)E2 A2 C#3 E3 A3 E482.4 110.0 138.6 164.8 220.0 329.6
Half step down (Eb)Eb2 Ab2 Db3 Gb3 Bb3 Eb477.8 103.8 138.6 185.0 233.1 311.1
Whole step down (D)D2 G2 C3 F3 A3 D473.4 98.0 130.8 174.6 220.0 293.7
Drop C (CGCFAD)C2 G2 C3 F3 A3 D465.4 98.0 130.8 174.6 220.0 293.7
C standard (CFADGC)C2 F2 Bb2 Eb3 G3 C465.4 87.3 116.5 155.6 196.0 261.6
Drop B (BF#BEG#C#)B1 F#2 B2 E3 G#3 C#461.7 92.5 123.5 164.8 207.7 277.2
7-string (BEADGBE)B1 E2 A2 D3 G3 B3 E461.7 82.4 110.0 146.8 196.0 246.9 329.6
8-string (F#BEADGBE)F#1 B1 E2 A2 D3 G3 B3 E446.2 61.7 82.4 110.0 146.8 196.0 246.9 329.6

The tuner starts in standard tuning, the one nearly all guitar music uses. Alternate tunings, a custom tuning builder and a tuning history are part of Tonelume Pro; the chart above is free for everyone and the tuner still hears any note you play, so you can tune a lowered string by ear and reference note.

What does “cents” mean?

A cent is one hundredth of a semitone, the distance between two neighbouring frets. Most people hear a difference once a string is about 5 to 10 cents off, so the green zone is 5 cents wide on each side. Each fret is 100 cents.

How accurate is the tuner?

We tested the page in a real browser with generated plucked-string tones (overtones plus light noise, the low strings with a weak fundamental) played through a test microphone at known pitches:

Test toneResult (note, cents off)
E2, A2, D3, G3, B3, E4 (standard guitar strings)each string recognised, within 0.1 cents
A4 at 440 HzA4, 0.0 cents
A4 at 442 Hz with A4 = 440A4, +7.8 cents (true value +7.9)
A4 at 442 Hz after setting A4 = 442A4, 0.0 cents, “In tune”

Real instruments add noise, vibrato and decay, so a real string can wobble a few cents; the tuner takes the median of the last five readings to keep the needle steady.

Why does the low E string read wrong sometimes?

Low strings have a weak fundamental and strong overtones, so a simple detector can lock on the octave above. The tuner uses a longer analysis window below 150 Hz and remembers the last note, which prevents most octave jumps. Pluck cleanly, let the string ring and mute the others.

Standard tuning notes, string by string

Tune from the 6th string to the 1st, always up to the note.

  • 6th (low E): E2, 82.4 Hz
  • 5th: A2, 110.0 Hz
  • 4th: D3, 146.8 Hz
  • 3rd: G3, 196.0 Hz
  • 2nd: B3, 246.9 Hz
  • 1st (high E): E4, 329.6 Hz

To check by ear, fret a tuned string at the 5th fret and match the next open string; for the 2nd string, fret the 3rd at the 4th fret.

Frequently asked questions

How do I tune a guitar with the microphone?

Press Start tuner, allow the microphone, and pluck one string at a time. The needle shows whether the string is flat or sharp; adjust the peg until the note turns green and the string is checked off.

Which string should I tune first, and what is standard tuning?

Start with the 6th string, the thickest low E, and work up to the thinnest. Standard tuning is E2 A2 D3 G3 B3 E4; recheck the low E at the end, because tuning the others can shift it.

Can I tune an electric, acoustic or classical guitar?

Yes. Hold the guitar near the microphone, or tune the unplugged string, and let it ring. Mute loud amps and other instruments, which confuse any tuner. Nylon and steel strings both work.

Why does my guitar go out of tune so quickly?

New strings stretch for the first days, and temperature or humidity changes move the pitch. Tune before each session, then check the 6th (low E) string again.

How do I tune to Drop D, DADGAD or half a step down?

Use the tuning chart for the notes of each tuning. Lower the 6th string to D for Drop D; for half a step down, tune every string to its flat note (Eb Ab Db Gb Bb Eb). Pluck a string and the tuner shows the note it hears, so you can steer each string to the note on the chart. Picking an alternate tuning in the tool for automatic string matching is a Tonelume Pro feature.

Can I change A4 to 432 Hz or 442 Hz?

Yes. Type any value from 415 to 466 Hz in the Calibrate box or use the plus and minus buttons. The setting is saved in your browser.

Is the guitar tuner free, and does it record my sound?

The tuner is free with no account and no time limit. It does not record: the analysis runs in your browser on a live stream; nothing is saved or sent. When you press Stop or leave the page the microphone is released.

Why does it say it cannot use the microphone?

Your browser blocked it. Allow the microphone for this site in the address bar and press Start again. Reference notes work without a microphone.